Pedals

Pedal MTF2 ComeSys

Foot pedal MTF 2/3

A smaller type of foot pedal for electronically controlled propulsion, based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Foot angle: 37˚ (MTF 2) 39˚ (MTF 3)
Operating temperature: -40˚C - +85˚C
pedal MTF789 ComeSys

Foot pedal MTF 7/8/9

A smaller type of foot pedal for electronically controlled propulsion, based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Foot angle: 31˚ (MTF 7) 35˚ (MTF 8) 45˚ (MTF 9)
Operating temperature: -40˚C - +85˚C
Pedal MTF10 ComeSys

Foot pedal MTF 10

Foot pedal with kickdown switch, based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Foot angle: 45˚
Operating temperature: -40˚C - +85˚C
Pedal F14-3 ComeSys

Foot pedal F14-3

Foot pedal with directional function in extra robust design, all metal, based on Hall sensor technology . Used, for example, for excavators where you need to be able to drive forward and in reverse with the same pedal.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 0.5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: Direction forward: 11 ˚, direction reverse: 11˚
Operating temperature: -40˚C - +85˚C
Pedal MTS2 ComeSys

Foot pedal MTF 2

Foot pedal of smaller model for vertical mounting, for example, on bulkheads. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 19˚
Operating temperature: -40˚C - +85˚C
Pedal MTS3 ComeSys

Foot pedal MTF 3

Foot pedal for vertical mounting, for example, on bulkhead. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 20˚
Operating temperature: -40˚C - +85˚C
Pedal MTS4 ComeSys

Foot pedal MTF 4

Foot pedal of smaller model for vertical mounting, for example, on bulkheads. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 20˚
Operating temperature: -40˚C - +85˚C
Pedal MTS7 ComeSys

Foot pedal MTF 7

Foot pedal in metal for vertical mounting, for example, on bulkheads. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 20˚
Operating temperature: -40˚C - +85˚C
Pedal MTS9 ComeSys

Foot pedal MTF 9

Foot pedal in metal for vertical mounting, for example, on bulkheads. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 20˚
Operating temperature: -40˚C - +85˚C
Pedal MTS81 ComeSys

Foot pedal MTF 81

Foot pedal for vertical mounting, for example, on bulkhead. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 20˚
Operating temperature: -40˚C - +85˚C
Pedal MTS82 ComeSys

Foot pedal MTF 82

Foot pedal for vertical mounting, for example, on bulkhead. Based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 5 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 20˚
Operating temperature: -40˚C - +85˚C
Pedal MTF5 ComeSys

Foot pedal MTF 5

Foot pedal with integrated front/back switch with option of red and blue lighting in the pedal. Robust metal construction with sensors based on Hall sensor technology.

Signal output: Analogue (single, double), PWM, CAN bus J1939, switch function
Connector: AMP J or as ordered
Service life: > 3 million cycles (mechanical)
Supply voltage: 5/12/24 VDC
Enclosure class: IP 67
Steering angle: 38˚
Operating temperature: -40˚C - +85˚C